Anand Associate - WHEN FIRE STRIKES, GET TIME ON YOUR SIDE
Contact Support
Contact Support
Our acrylic and intumescent firestop sealants provide flexible, durable and certified passive fire protection for walls, floors and building service openings in commercial and industrial structures.
Ace Mastik Sealant is a joint filler and sealant for penetration seals and fire separating walls such as curtain wall, top of wall, top of wall joint, high movement expansion joint and joints in either walls or floors, sealing up to 50 mm around pipes, etc.
Consumption guide values are given as jointlengthin metres per 420 gm Cartridge.
| PROPERTY | PRESENT VALUE |
|---|---|
| Density | 1.31 to 1.41 gms/cc |
| Cartridge Content | 310 ml/420 gms |
| Storage Temperature | 5°C to 50°C |
| Application Temperature | 5°C to 50°C |
| Curing Time | 4 to 6 hours |
| PH Value | 6 to 8 |
| Color | off-white |
| Odor | Odorless |
| Shelf Life | 12 Months, In Original Packed Condition |
VS Mastik Intumescent Sealant is a fire-rated sealant used to seal joints and through-penetrations. It cures to an elastomeric seal to enable dynamic movement (where required). This sealant expands multiple times and chars without letting the fire penetrate through the joints.
| PROPERTY | PRESENT VALUE |
|---|---|
| Density | 3 1.31 to 1.41g/cm |
| Fire Rating | 2 Hours |
| Curing Time | 3-4 Hours(TouchDry) |
| Shelf Life | 12 Months |
| PH | 6.0 to 8.0 |
| Application Temperature | 5°C to 50°C |
| Humidity & Moisture Resistance | Good |
| Toxicity | Non Toxic |
| Odor | Odorless |
| Flash Point | None |
VS Fire Rated Expansion Joint Seal is a system that uses Ace Panel Seals to seal various joint openings in а building structure as a firestop measure. There are various types of joints in a building structure, namely 'Wall to Wall', 'Floor to Floor' or 'Wall to Floor'. Ace Panel Seal is a firestop system consisting of mineral wool as backfill material with Ace Mastik Coating which is fixed at site in the joint gaps of a building structure. Mineral wool boards are cut to size and fixed in gaps to requiredminimum thickness. Ace Mastik Coating is applied at the exposed surface of the mineral wool board, in the gaps between the Ace Panel edges, and the edges of the walls / floors. VS Expansion Joint Seal System prevents the spread of fire, smoke and toxic gasses through gaps of building joints during a fire when installed inaccordance with the installation procedure.
| PROPERTY | PRESENT VALUE |
|---|---|
| Application Temperature | 5 °C to 50 °C |
| Density of Ace Mastik | 1.25 to 1.40 gms/cm |
| pH of Ace Mastik | 6 to 8 |
| Appearance | Grey /off White Thick Liquid |
| Odor | Odorless |
| Flash Point | None |
| Resistance to Moisture &Humidity | Good |
| Toxicity | Non Toxic |
